The EPEVER Tracer AN Series Solar Cost Controller is a very successful photo voltaic controller suitable for off-grid solar methods. Determined by multiphase synchronous rectification technology, it assures optimized Electricity conversion and technique steadiness for a variety of photovoltaic (PV) purposes.
Vital Features of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technology for exceptional solar Vitality harvesting. Crucial functions incorporate:
Multiphase Synchronous Rectification (MSR) for improved Strength conversion.
Innovative MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for enhanced battery life.
LCD Display with real-time data checking.
Various Load Regulate Modes which include handbook and timer.
Thorough Electronic Protections towards overcharging, above-discharging, brief circuits, and reverse polarity.
Step-by-Step Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Preparing the Controller
Make sure all components are integrated: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Validate the product variety and voltage rankings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the provided mounting brackets.
Manage suitable clearance for heat dissipation.
3. Wiring the Solar Charge Controller
Warning: Normally observe suitable security protocols and ensure the procedure is driven off just before connecting components.
Move one: Link the battery terminals to the demand controller (constructive to good, negative to destructive).
Phase 2: Join the photo voltaic panel array towards the PV enter terminals.
Action 3: Join the load terminals if utilizing a direct load connection.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electrical power around the controller by connecting the battery very first.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports genuine-time checking utilizing the MT50 distant meter.
Details is usually logged through the RS485 communication port working with computer software which include Solar Station PC.
Distant checking is achievable with the visit here EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Concern one: No Energy Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Modify process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification technological innovation assures:
Higher Performance: Lessened Strength losses throughout conversion.
Improved Trustworthiness: Steady general performance beneath variable loads.
Lengthier Battery Lifestyle: Dependable and accurate charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technology is really an exceptional option for optimizing solar power era and increasing battery lifestyle. By adhering to the above mentioned setup guidebook, users can ensure optimum effectiveness and technique longevity.