The EPEVER Tracer AN Collection Photo voltaic Cost Controller is a very successful photo voltaic controller suitable for off-grid solar methods. Determined by multiphase synchronous rectification know-how, it guarantees optimized Strength conversion and process stability for a wide array of photovoltaic (PV) purposes.
Crucial Capabilities of your EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technology for superior solar Power harvesting. Important attributes contain:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery life.
Liquid crystal display Exhibit with real-time data monitoring.
Several Load Manage Modes such as manual and timer.
Complete Electronic Protections against overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Action Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model quantity and voltage ratings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the provided mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Often adhere to proper protection protocols and make sure the program is run off before connecting components.
Stage one: Join the battery terminals on the charge controller (good to positive, destructive to detrimental).
Phase 2: Join the solar panel array towards the PV enter terminals.
Phase 3: Connect the load terminals if using a direct load connection.
Step four: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Configurations
Electric power about the controller by connecting the battery initially.
Make use of the LCD Screen to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Handle.
five. Checking and Information Logging
The Tracer AN Collection supports actual-time checking using the MT50 remote meter.
Facts could be logged by means of the RS485 communication port utilizing software like Photo voltaic Station Laptop.
Remote checking can be done Using the EPEVER WiFi module.
six. Troubleshooting Popular Issues
Problem one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty two: Around-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Change method parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Read more Technological innovation
The multiphase synchronous rectification technology assures:
Bigger Effectiveness: Lessened Power losses all through conversion.
Enhanced Dependability: Stable efficiency less than variable loads.
More time Battery Life: Regular and exact charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is surely an Remarkable choice for optimizing solar power technology and extending battery existence. By next the above setup tutorial, buyers can make certain greatest performance and method longevity.